在电子世界, PCB走线对于确保高效运行起着至关重要的作用. 印刷电路板上的这些路径 (印刷电路板) 促进信号的流动, 力量, 和数据, 连接电子元件. Understanding the importance and functionality of PCB traces is crucial for engineers and designers. Proper trace width, 长度, impedance, and routing are essential. This comprehensive guide explores trace design principles, trace width calculations, suggestions for better design, and trace repair techniques.
What Is a PCB Trace?
A PCB trace is a conductive pathway on a printed circuit board that connects electronic components. It is typically a thin line of copper or other conductive material that carries electrical signals between different components, such as integrated circuits, 电阻器, 电容器, 和连接器, 在印刷电路板上. These traces are designed to transmit signals and power while maintaining specific electrical characteristics, such as impedance, signal integrity, and minimizing electromagnetic interference (电磁干扰). The layout and design of PCB traces play a crucial role in the overall performance and functionality of electronic devices.
Understanding the PCB Trace Thickness
PCB trace thickness plays a significant role in determining the trace’s ability to carry current, handle thermal dissipation, and resist external factors. A thicker trace can carry higher current levels without overheating, reducing the risk of electrical failures. 而且, a thicker trace can also dissipate heat more effectively, ensuring the reliability of components. 另一方面, a thinner trace allows for more compact designs and finer routing, but it may have limitations in terms of current-carrying capacity and heat dissipation. PCB designers and manufacturers carefully consider the specific requirements of a circuit when determining the appropriate trace thickness, balancing factors such as current requirements, space constraints, signal integrity, and thermal considerations to achieve optimal performance and reliability.
There is a range of common PCB trace thicknesses available, typically measured in inches or millimeters. 这些包括 0.008 inches to 0.240 英寸 (或者 0.2 毫米至 6.0 毫米). Some specific examples include 0.2 毫米, 0.4 毫米, 0.5 毫米, 0.8 毫米, 1.0 毫米, 1.5 毫米, 2.0 毫米, 2.3 毫米, 等等.
How to Calculate the Trace Width of PCB
通常, we use a professional calculator to calculate the trace width based on industry standards, below we introduce the two most common standards that are IPC2221 and IPC2152:
Introduced in 1954, the IPC 2221 computer employs a combination of charts and the formula I=kΔTbAc to determine the current flowing through a trace. The value of k differs based on whether the routing is visible (0.048) or internal (0.024). The change in temperature, represented as Delta T, plays a crucial role. 此外, b remains constant at 0.44, while A represents the cross-sectional area of the trace. It is important to utilize values within the specified range to achieve accurate results during the calculation process. The current should range between 0 和 35 amperes, while the copper width must not exceed 0.5 oz or fall below 3 盎司. The track width selection falls within the range of 0 至 10.16 毫米. 此外, the temperature fluctuates between 10 和 100 摄氏度.
Compared with IPC2221, the development time of IPC2152 has been updated, and the relevant parameters such as the material and thickness of the circuit board have been fully considered, so the calculation results will be more accurate. The era of depending solely on simple formulas for calculations has passed, giving way to the adoption of more sophisticated technical methods. 原来, a chart is utilized to establish the initial cross-sectional area. 随后, parameters are employed to derive correlation coefficients like PCB厚度. 按照此, the unadjusted cross-sectional area is multiplied by the coefficient, yielding the adjusted cross-sectional area.
建议 为了 更好的 PCB Trace Design
Proper PCB trace design is critical, which affects the overall performance, 功能性, and reliability of the board. Below we list some design tips:
- Routing Options
Routing can be categorized into manual wiring and automatic wiring. While automatic wiring is an integral feature of PCB design software, designers cannot solely rely on this functionality. Manual wiring is essential to unleash the designer’s creativity and flexibility, as automatic routing serves primarily as a time-saving tool.
- Choosing the Width of PCB Traces
The selection of PCB trace width holds significant importance in circuit operation. It is crucial to ensure that the width of PCB traces is appropriate to handle the capacitance and facilitate the smooth flow of current. Precise determination of the minimum width is essential to prevent circuit board overheating, which directly impacts heat management and overall performance.
- Connect to the Ground Plane
In order to ensure consistent voltage measurement across all individual PCB traces, it is important to connect each trace to the ground plane rather than a separate ground point. The ground plane serves as a common reference point for all tracks, preventing variations in voltage and resistance. 为了达成这个, it is advisable to create a solid ground plane beneath the signal-carrying path, as it can enhance resistance to noise and reduce impedance. 此外, placing power and ground planes in the innermost layer of the board can prevent component distortion or separation caused by board bending.
- Minimize Capacitive Coupling
To minimize the effects of capacitive coupling caused by adjacent tracks and ground planes, it is advisable to separate PCB traces dedicated to the power supply and analog signals. This segregation helps reduce unwanted capacitive coupling between the tracks above and below the ground plane. 此外, the use of decoupling capacitors is an effective and cost-efficient measure to mitigate capacitive coupling in practical circuit designs.
- Separate High-speed&low-speed Signals
Keep high-speed signal traces separate from low-speed signals to minimize crosstalk and interference. This can be achieved by routing traces on different layers or by using ground planes as isolation barriers.
How To Repair PCB Traces?
Acquiring knowledge on how to repair PCB trace issues is equally significant. When the power supply unit exhibits problems like display failure or unusual noise, it indicates the need for PCB trace repair. The following are the detailed steps for PCB trace repair:
- Begin by locating the damaged trace on the PCB.
- Carefully remove the damaged trace using a cutting tool, taking care not to harm nearby components.
- Clean the damaged areas until they display a copper color, and apply solder to the exposed regions.
- Use a cleaning paper towel or solvent cleaning pen to clean the repair area. Apply flux to the existing track and use a soldering iron to assist in soldering both sections of the track.
- Choose a suitable replacement wire that is in good condition and of the appropriate size.
- Tin the ends of the replacement wire.
- If the replacement wire is suitable, remove the insulation from both ends and solder it in place.
- Solder one end of the replacement wire. Ensure that a section of the new wire overlaps the existing trace by at least twice the width of the PCB trace. Secure the wire with tape, apply flux to the overlap, solder the wire, and trace it together.
- Shape the wire flexibly according to specific needs and requirements.
- Attach the wire securely to the surface of the circuit board using tools like tape or adhesive.
- 最后, solder the other end of the replacement wire.
- After soldering, complete the repair process and ensure the connection is normal. Clean any remaining residue or stains.
Proper PCB trace routing ensures board performance, 可靠性, 和成本效益, making PCB设计 and manufacturing easier. 所以, it is really necessary to understand the basic knowledge of PCB traces and routing design skills. As a leading PCB manufacturer, MOKO Technology is proficient in all aspects of circuit board knowledge, if you still have questions about PCB traces, 你可以 联系我们, and our experts will be delighted to assist you.